How to Use a Hidden Camera Detector to Protect Your Privacy in Hotels, Airbnb, and More

Step 1: Understand What Your Device Detects

Most multi-functional detectors (like the JMDHKK K68+) can detect:

  • Wireless cameras via RF signals

  • Wired or powered cameras via infrared lens detection

  • GPS trackers and listening devices via magnetic and signal detection

Familiarize yourself with the three modes usually included:

  1. RF Signal Detection Mode

  2. Laser Light / Infrared Lens Detection Mode

  3. Magnetic Field Detection Mode

Step 2: Prepare Before Scanning

Before you begin scanning:

  • Fully charge the device (via USB, usually takes 2–3 hours).

  • Turn off all personal wireless devices (phones, Bluetooth, Wi-Fi) to avoid interference.

  • Dim the room lights if using the laser mode.

Pro Tip: Walk slowly and hold the device around chest height when scanning a room.

Step 3: Start with RF Signal Detection

This mode helps you locate wireless signals from hidden cameras or eavesdropping devices.

  • Turn the detector on.

  • Adjust the sensitivity (start high, reduce gradually if signal spikes).

  • Walk slowly and sweep the detector near:

    • Smoke detectors

    • Clocks

    • Mirrors

    • Wall outlets

    • Light bulbs

    • Air purifiers or routers

If the detector beeps or lights flash, pause and inspect the area.

 

Step 4: Use the Infrared Lens Detector

This mode helps you find hidden camera lenses—even if the camera isn’t transmitting.

  • Press the laser button.

  • Look through the viewfinder.

  • Slowly scan the room while looking for bright red reflections—these could be camera lenses.

Check areas like:

  • Curtain rods

  • Bookshelves

  • Air vents

  • TV sets

Step 5: Scan for GPS Trackers in Cars

If you're scanning a vehicle:

  • Switch to Magnetic Field Detection Mode.

  • Scan under seats, behind bumpers, under the dashboard, and in wheel wells.

  • The detector will beep if it senses a magnetic object often used in GPS trackers.

Bonus Tips for Best Results

  • Scan twice: once during the day and once at night with lights off.

  • Trust your instincts—if something looks or feels out of place, investigate it.

  • Carry the detector when traveling, attending confidential meetings, or using public changing rooms.

Final Thoughts

Your privacy is your right. With just a few minutes of scanning and the right device in hand, you can reduce your risk of being secretly recorded or tracked. Devices like the JMDHKK Hidden Camera Detector are compact, easy to use, and essential for anyone serious about protecting personal space.

Better safe than sorry—start scanning today.

Back to blog

Leave a comment

Featured collection